That’s a good point! Have you checked the cable connections? Sometimes a loose throttle cable can cause issues like this.
If your car goes in reverse without issues, it might indicate it’s not a complete transmission failure. Still, checking the error codes is crucial first.
I would look into the shift linkage as well. Sometimes they can get out of alignment and cause issues in drive.
Good call! I had a similar problem before, and it turned out to be just a misaligned linkage. A quick fix!
Don’t forget to check the brake system! If the brakes are applied, they may prevent the car from moving in drive while allowing reverse.
If all else fails, you might need to consult a mechanic. It’s always better to get a professional opinion if you’re not sure.
True! But before spending a lot, try all the diagnostics mentioned. You might just fix it yourself!
7 Likes
Has anyone experienced a similar issue? I’m curious if it could also be related to the electronic control system of the transmission.
Could be! But avoid jumping to conclusions. It’s probably worth going through the simpler checks first, like fluid condition and error codes.
Exactly! Each car is different. The steps outlined should help narrow down the problem effectively.
It’s almost like a riddle! ‘What’s in drive but doesn’t go, yet moves fine in reverse?’ Maybe your car is just having a moment! But seriously, these steps really help.
1 Like
Haha, I love that! But jokes aside, I really agree with the need for thorough diagnostics. It’s crucial!
4 Likes
Sounds like a classic transmission issue! If it goes in reverse but not forward, it might be the transmission fluid or a problem with the linkage. Have you checked the fluid levels?
1 Like
I had a similar issue, and it turned out to be a clogged filter in the transmission. Cleaning or replacing it fixed my car!
Hmm, interesting! I’ve read that low transmission fluid can cause these problems too. How often do you all check your fluid levels?
I paid around $150 for the filter and labor. If you’re handy, you can also tackle it yourself for about $50. Just make sure to consult your manual!
That’s interesting! Any idea how much it cost you to replace the filter, @kjohnson? I’m hoping to avoid huge repair bills if possible.
I check mine every few months! If you’re not sure how, it’s pretty easy to do. Just pull the dipstick, and you can see if you need to top it up. It’s usually a dark red color.
Don’t get too hopeful, @rdavis! I once had a situation where it was just fine and still wouldn’t move. Ended up needing some internal repairs.
2 Likes
That sounds simple enough! I’ll definitely give it a shot this weekend. Fingers crossed it’s just low fluid!
6 Likes