Best Rust Converter for Truck Frames?

Accessories & Modifications
1

I’m reaching out for some advice on rust convertors specifically for truck frames. I’ve noticed some rust developing on my truck, and I want to make sure I tackle it correctly before it gets worse. I’ve heard a few different things about various products out there, but I’m not sure which one to go with.

What to Look For

  • Effectiveness: I want something that really works to stop rust in its tracks.
  • Ease of Application: As someone who’s not super handy, I need a product that’s easy to apply without needing special tools.
  • Durability: I want to ensure it lasts and protects the frame effectively.

Questions

  • Which rust converter products have you found to be the most effective?
  • Are there any specific brands or types to avoid?
  • Any tips for the application or preparation before using the rust converter?

Would love any input or experiences you can share!

6 Likes
2

I’ve had good results with POR-15 Rust Converter. It’s specifically formulated for automotive use and really helps preserve truck frames. Just follow the instructions and you’ll be pleased with the results!

2 Likes
3

I also like the Rust-Oleum Rust Reformer. It’s easy to apply and goes on smoothly! Anyone else tried it?

4

I’ve used Eastwood’s rust converter as well and found it effective. The spray can makes it easy to reach tricky spots on my truck frame!

5

Good tip! Eastwood’s is a solid choice. I would recommend applying it before winter to prevent further damage from road salt.

6

Has anyone tried Fluid Film? I’m curious about its long-term protection capabilities against rust compared to traditional converters.

7

I’ve tried Fluid Film, and while it doesn’t convert rust, it provides excellent protection after treatment. It’s great if you want to prevent future rust!

8

Interesting perspective! I’m weighing options but leaning towards dedicated converters not just protectants.

1 Like
9

I really think you can’t go wrong with Rust Bullet. It’s a bit pricey, but the durability it offers is unmatched!

10

Rust Bullet has a good reputation. Do you think it’s worth the investment for a DIY job?

11

I find that sometimes cheap solutions can backfire. I once tried a no-name brand and it barely worked. Stick with reputable brands, folks.

12

Absolutely! A friend of mine learned that the hard way after using a budget product. Glad he didn’t wait for it to rust through!

13

LOL, I tend to think of rust as the truck’s way of getting a new paint job! But in reality, keeping it clean is what matters.

2 Likes
14

Great humor, leeriddle! A new paint job brought on by rust? That’s one way to look at it! But for real, how are you treating your truck now?

15

I’m considering a rust converter and a quality sealant afterwards. Anyone have tips on sealants to use post-treatment?

16

I’ve heard that using a wire brush to prep the surface is key for rust converters to bond correctly. Make sure to remove all loose rust before applying anything!

17

Absolutely! Using a good wire brush works wonders. Also, rinse the frame afterwards to remove any dust or debris.

18

Don’t forget to check the weather! Apply the converter in dry conditions, ideally above 50°F, to ensure proper curing.

19

That’s a great tip! Does anyone know how long the drying process generally takes for different converters?

3 Likes
20

Most rust converters take about 24 hours to cure fully. However, some products may vary, so it’s good to check the specific instructions on the label.